Cocco Hyperveloce Pro Clipper Pink - clipper

The Hyper Veloce Pro Clipper is a premium product from Cocco Hair Pro, recognized for its vibrant, color-matched design. 
Available in dark teal, green, orange, red, yellow, fuchsia and military, it combines style, ergonomics and high performance.
The color-matched charging base adds both style and elegance.

BEFORE USING THE RAZOR FOR THE FIRST TIME: Charge continuously for 3 hours.
The battery will only reach its full capacity after 3 charging cycles.
1. Make sure the clipper's switch is in the "0" (OFF) position.
2. Insert the charging cable into the base underneath the clipper.
3. Plug the adapter into the electrical outlet. The charging indicator will light up blue and flash to indicate that charging has begun.
Charging takes 3 hours to complete.
OILING THE CLIPPER FOR THE FIRST TIME:
1. Oil the blades before using the razor for the first time.
2. Turn the clipper on using the ON/OFF switch.
3. Use only the recommended oil and lubricate the blades after each use.
CHARGING / PLUG-IN Make sure the clipper is turned off.
Plug the cord into the base of the shaver and plug the adapter into a power outlet.
ON/OFF SWITCH To start the shaver, slide the switch to ON (marked "I").
To turn off, slide the switch to OFF (marked "0").
ADJUSTING THE CUTTING LENGTH USING THE BLADE LEVER: The cutting length can be adjusted even during use.
When the lever is in the highest position, the blades will cut shorter.
Gradually moving the lever downwards will increase the cutting length.
USING THE COMB: To use the comb, slide the switch to "0" (OFF).
Slide the base of the comb over the tip of the razor blade; then slide it downwards, over the back of the blade.
To remove it, push the comb up away from the back of the blade and then remove it from the blade.
Always apply lubricant to the blades before and after use to ensure the best cutting performance and proper maintenance.
Hold the shaver upside down, away from your body, and apply a drop of lubricant to the front and sides of the blade.
Remove excess oil with a soft, dry cloth.
Do not push, twist, or wrap the charging cord around the appliance.
For home and commercial use.
BLADE REPLACEMENT / REMOVAL
1. Unplug the appliance.
2. Remove the screw and the fixed blade. Set the screws aside.
3. Lift the movable blade and replace it with the new one.
4. Replace the fixed blade using the screws and tightening them slightly. Adjust the teeth, as shown in figure C, to a distance of 1 mm to 1.5 mm. The small, movable blade should be as centered and parallel as possible to the teeth of the fixed blade.
IMPORTANT NOTE: The top edge of the fixed blade must be at least 1 mm higher than the top edge of the moving blade, and must be as centered as possible.
Proper positioning is essential to prevent the moving blade from coming into contact with the skin. Be sure to lubricate the blade before starting the shaver.
Remember to tighten the screws after aligning the blades.

It combines cutting-edge technology, ergonomic design, and versatile features to deliver a superior grooming experience. 
An ideal tool for barbers seeking high performance and style, setting new standards in professional grooming.

Combina tecnologia avanzata, ergonomia e versatilità, offrendo taglio preciso, funzionamento silenzioso e durata professionale.
Uno strumento ideale per barbieri che cercano prestazioni elevate e stile, stabilendo nuovi standard nel grooming professionale.

Package Contents
- Colorful charging base
- USB-C cable and power adapter
- Blade oil, cleaning brush, and blade guard
- 8 professional detachable guards, Blade Technology: Graphene Taper Blade
- Smooth atomic surface: reduces friction and heat during cutting
- Rockwell 90 hardness: maximum durability and consistent sharpness, Power and Performance
- Brushless DC motor: high torque, precise control, and almost unlimited battery life
- 2500 mAh battery: over 3 hours of battery life with 2 hours of charging
- Microcontroller system: motor management, charging, and overheating protection Functionality and Comfort
- Fast USB-C charging
- Integrated hook for easy storage Slide switch and status LED (on, low battery, charging, full charge)
- Design and Ergonomics
- Ultra-light aluminum body for a balance between strength and comfort
- Nature-inspired lines: elegance and ergonomics combined
- Low noise: 71 dB, among the quietest on the market Precision and Versatility
- Adjustable blade: 5 levels from 0 to 0.6 mm for detailed cuts -  8 detachable guards, enabling barbers to achieve consistent and customizable cutting lengths with ease.

Do not use the tool near bathtubs, showers, sinks or other containers containing water.