Babyliss Pro Rotating Air Brush in Ceramic BAB2770E

Perfect power to add volume.
The 50 mm brush is perfect for styling long hair, while the 40 mm brush allows you to work perfectly on shorter sections of hair and on fringes.

Ion technology to eliminate unwanted curls and static electricity.
Features
• Ceramic technology
• 2 interchangeable round brushes: 40 mm and 50 mm Boar bristles and nylon reinforced with epoxy tips
• Power 800 W
• 2 temperature levels + "fresh air" position
• 2 directions of rotation
• Ionic
• 2.70 m swivel cord
• Articulated rear filter for easy cleaning

• After shampooing, dry your hair well with a towel, then carefully detangle it.

• Use the air brush on briefly dried, slightly damp and perfectly detangled hair.

• Work the hair in sections, lifting them with pliers. Start with the locks of the lower part. The strands to be worked must have a maximum thickness of 2 cm, as uniform as possible.

Put on and remove the brushes

Insert a brush on the body of the appliance. Close it by operating the lock located on the upper section of the brush.
To remove a brush, unlock it and gently remove it.
Using the rotating brush

• To prepare the lock and untangle it, start from the root on a thin lock; smooth the lock in one or two steps with the appliance running hot but without turning the brush.

• Raise the lock by 90 °, at a right angle to the skull, so that the hair on the lower part does not get tangled.

• Slide the brush over the lock by turning the brush without the lock making a complete turn; repeat the gesture several times by sliding the lock from the root towards the tips.

• Conclude with a complete turn of the lock around the brush, starting from the tips and going up to the root. Keep for a few seconds, in order to heat and style the whole lock and give volume to the root.

• If necessary, repeat the operation, depending on your hair type.

• The fresh air function then allows you to fix the result for a long time. To do this, activate the fresh air function without turning the rotating head.

Brushing towards the outside
Place the brush on the tip of the hair above the lock and start the automatic rotation with winding outwards.

Inward brushing
Put the brush at the tip of the hair, below the lock and activate the automatic rotation with inward winding.

Read these safety precautions carefully before using the unit! This appliance should only be used as described within this instruction booklet. Please retain for future reference. BURN HAZARD: keep appliance out of reach from young children, particularly during use and cool down. Always take extra care if used on children or near children. Do not use on very young children. WARNING: not use this device in a bathtub, shower, or water-filled reservoir. UK Only: This appliance must not be used in the bathroom. Outside the UK: If using the appliance in a bathroom, unplug after use as the proximity of water can be dangerous even if the appliance is switched off. For additional protection the installation of a residual current device (RCD) with a rated residual operating current not exceeding 30mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice. Do not immerse the appliance into water or other liquids. Always inspect the appliance before use for noticeable signs of damage. Do not use if damaged, or if the appliance has been dropped. In the event of damage, discontinue use immediately. Contact the Customer Care Line. Do not use the appliance if the lead is damaged. In the event of damage, discontinue use immediately. If the lead is damaged it must be replaced by the manufacturer. Return the appliance to the Customer Care Centre. No repair must be attempted by the consumer. Do not leave the appliance unattended when switched on or plugged in. This appliance is equipped with a safety thermostat. In the event of overheating the appliance will either stop automatically or run hot and cold intermittently. Should this happen, switch the appliance to the ‘0’ position, unplug and allow to cool for 10 minutes. Before use, ensure the rear filter is clear of hair and other debris. Plug in and switch on. If the appliance continues to overheat discontinue use immediately, switch off and unplug, and contact the Customer Care Line. Take care that the air vents do not become blocked when in use. Ensure the rear filter is clear of hair and other debris before use. Always ensure that the rear air filter is kept away from hair during use to prevent it being dragged into the fan which may cause the appliance to overheat. Take care using this appliance when wearing jewellery, in particular necklaces and earrings to avoid entanglement in the rotating brush head. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. This appliance should not be cleaned or maintained by children. Allow the appliance to cool before storing away. After use, do not coil the lead around the appliance as this may cause damage to the lead. Instead, coil the lead loosely by the side of the appliance. Do not use any accessories other than those recommended by BaByliss. Always unplug the appliance when not in use or before cleaning. This device is designed to be used for collective use. This product complies fully with all appropriate legislation and the Standards relevant to this type and class of appliance. We are an ISO9001:2015 certified company that continually evaluates our Quality Management System performance. If you have any queries regarding product safety and compliance, please contact the Customer Care Line. WEEE-END-OF-LIFE ELECTRICAL AND ELECTRONIC EQUIPMENTS In everybody’s interest and to actively participate in protecting the environment and human health: Do not discard your products with your unsorted household wastes. The WEEE (wastes of electrical and electronics equipment must be collected separately. Use the return and collection systems dedicated to the WEEE available in your area. In this way, some materials can be recycled, re-used or recovered. By ensuring this product is disposed of properly, you will help prevent potential negative consequences for the environment and human health due to possible content of hazardous substances. For more detailed information about the disposal of this product, please contact your local household waste disposal service.

safety instructions